30m or As required
1 to 400
Stainless steel AISI 304, 304L, 316, 316L, G.I., Copper, Phos.Bronze, Aluminium and Brass.
We offer wide range of Wire Cloth with varied aperture sizes and weaves. Their texture also varies from being fine, soft and flexible as silk to as rigid as steel plate. They are available in rolls or in cut circles and also as fabricated filters. On request, we can also provide the same in some other metals like Monel, Nickel, Hastelloy, phosphorous Bronze, Copper and Brass. As a result, we have carved a niche for ourselves as one of the most prominent Wire Mesh Manufacturer, Importer & Exporter.
Material : Stainless steel AISI 304, 304L, 316, 316L, G.I., Copper, Phos.Bronze, Aluminium and Brass.
We manufacture wire mesh from 1 mesh to 400 mesh in various grades of stainless steel, that is SS 201, SS 202, SS 304, SS 316 Etc... And as per customer's requirement.
We can manufacture upto 6mm thickness of wire.
Length: Length of rolls are usually 15 meters or 30 meters, or as required by the customers.
Width: We can weave upto 3 meters wide.
SQUARE MESH / FINE MESH
The most commonly used weave. Openings are square. Each weft wire passes alternately over and under each warp wire and vice versa. Warp and weft wire diameters are generally the same. It produces screens with the same mesh count in both directions.
Plain weave meshes are available with apertures from 10.7mm (2 mesh) to 0.05mm (325 mesh). Suitable for many commercial applications.
TWILL WEAVE (TW)
Twill weave can be made from larger diameter wires than would be possible in plain square weave to obtain greater strength, density, or corrosion resistance. This weave is stronger than plain weave. Each weft wire alternately crosses over two, then under two, warp wires producing a diagonal pattern. The wire diameter for both warp and weft is normally the same.
Twill weave is usually used to accommodate a heavier than standard wire diameter in association with a given mesh.
PLAIN DUTCH WEAVE WIRE MESH (PDW)
Woven in an over and under pattern, but warp wires are heavier — larger in diameter — than shute wires which are driven very close to create a high density wire mesh with much lower flow rates and much higher particle retention than plain square weaves
TWILL DUTCH WEAVE WIRE MESH (TDW)
Similar to Plain Dutch except woven in the Twill Style. Each wire passes over two wires then under two wires, still utilizing a smaller-diameter shute wire, allowing an even tighter weave and even finer filtration than Plain Dutch Weave.
REVERSE TWILL DUTCH WEAVE (RTDW)
Reverse Dutch Weave is produced by the use of coarse mesh (mesh wire, woven wire mesh) in the warp and a fine mesh with relatively smaller wire in the fill. This weave results in greater strength with very fine openings and is primarily used as a filter cloth. The shape and position of the openings aid particle retention and increase filter cake formation.
A plain weave with the warp wires of a larger diameter than the weft. The weave is made up of a limited number of warp wires interwoven with the maximum number of weft wires which can be knocked up. The cloth is strong and firm and is most frequently used for high pressure filtration.
- Mining areas
- Chemical Industries
- Food Industries,
- Filtration, sifting, sizing
- Marine uses
- Faucet screen
- Pharmaceutical Industries
- Insect screen
- Insect screen in a marine environment
- CRT screen , High transparency grade
- Decorative / Craft Applications